5.5V 1.5W solar panel outdoor security motion sensors 25LED led light SL1-20
1. Unlock and activate the device
The internal battery is locked from factory for safety shipment, so users have to use supplied Key pin to click the "on/off" socket and unlock the battery and lighting system. For the first click, the red LED will be on 1 second and off 0.5 second, this shows the lamp goes into light control steady on working mode. If you click one more time, the red LED will be on showing the lamp goes into light control + motion-motivated working mode. For the thirdly click, the read LED will be turned off, so is the lamp.
2. After you decide the lamp working mode, according to the sketch map please use the supplied Expansion pillar-hinge and screws to install the lamp facing it south and making sure the solar panel can get the good sunlight directly
3. In the daytime, the lamp gets charged by sunlight; when it gets dark, the lamp will turn on and work as the selected working mode setting.
A.CDS + motion-motivated working mode:in the evening, when the lamp is triggered by human motion, it will automatically turn on bright light for 30 seconds. Then, to save power, it will auto turn to dim light. When there is motion sensed, the bright light turns on.
B.CDS steady on working mode:the lamp gets charged in the daytime, then in the evening it lamp will be on in bright light.Specification
|Solar panel||5.5V 1.5W|
|Lithium battery||3.7V 1500mAh|
|Light source||25PCS LED|
|Working current||50mA(dim light);400mA(bright light)|
1. This solar lamp is energy-saving, easy-installed.
2. Widely used for courtyard, roadside, squares, scenic zones lighting.
3. Two optional working modes: CDS + motion-motivated; CDS steady on
4. Simple installation---- just using screws to mount it on the wall, no need for wires. The subject and the lamp holder can be separated, so it is convenient to switch the working modes.
5. It is of integrated and ultra-thin design. Lightweight and beautiful.
1. Solar panel:5.5V 1.5W
2. Lithium battery:3.7V 1500mAh
3. Light source:25PCS LED
4. LED:6-7LM/pc,color temperature:6000-6500K
5. Rated power:1.2W
6. Standby current:4UA
7. Working current:50mA(dim light);400mA(bright light)
8. Senor-motivated area: :2.5-3m
1. The lighting time of this solar lamp is determined by the sunlight intensity, weather condition and solar panel position, etc.
2. When the red LED flickers, that indicates the battery voltage is too low, the product goes into low power protection status. Then it will return to the CDS + Motion-motivated working mode after it is charged again.
3. The lamp has built-in Li-ion battery, please keep it away from high temperature to avoid explosion.
4. Please do not beat or impact the lamp, so as to avoid damage.
5. Do not let children play with this lamp.
|3A-6V Solar Controller||1 pcs|
|Size||9.00*5.00*3.00 / piece|
|80cm*35cm*33cm / carton|
|Weight||0.05kg / piece|
|15kg / carton|
|Quantity||31piece / carton|